Print an image at actual size

Type the size you want on paper, in millimeters, centimeters or inches, and Scooch creates a PDF at exactly that size. Print it at “Actual size” or “100%” and the image comes out as you set it.

Open Scooch with an A4 sheetOpen with a Letter sheet

How to do it

  1. Open Scooch and add the image with Add.
  2. Select it and type the Width or the Height in Properties, in the Item tab. The other side adjusts by itself, so the image isn’t distorted.
  3. Prefer centimeters or inches? Change it in Preferences, under Units.
  4. Press Print and, in the print dialog, choose “Actual size” or “100%”.
  5. Measure the print with a ruler before printing many copies.

Why the printer changes the size

The PDF from Scooch has the exact size of the sheet and of each image. The size changes at the last step, in the print dialog: with “Fit to page”, “Fit to printable area” or a similar option, the printer shrinks everything to fit what it can print. Choose “Actual size” or “100%”, and check that the paper in the dialog is the same as the sheet’s.

If the image touches the edge of the sheet, it may be cut off: many printers can’t print all the way to the edge. Leave a margin; Scooch warns you when an item crosses the margin or goes off the sheet.

The 100% button

In Properties, the 100% button sets the image to the size its own resolution says. For example, a photo of 1200 × 1800 pixels at 300 ppi measures 101.6 × 152.4 mm. Use it if the image already has the right size, like a scanned plan or pattern.

Scooch shows the ppi (pixels per inch) each image will print at, and warns you if it may look pixelated at the size you chose. The larger you print it, the fewer ppi it has.

Frequently asked questions

How do I print an image at an exact size in centimeters?

Add it to Scooch, change the units to centimeters in Preferences and type the width or the height in Properties. Then print at “Actual size” or “100%”.

Why does the image print smaller than it should?

It’s almost always the scale in the print dialog. Choose “Actual size” or “100%” instead of “Fit to page”.

Can I print a PDF at actual size?

Yes. Add the PDF: each page is an item with its original size. Put it on a sheet of the same size or larger and print at “Actual size” or “100%”.

What is ppi?

Pixels per inch: how many of the image’s pixels fit in each printed inch. With few ppi, the image can look pixelated; Scooch warns you when the resolution is low for the size you chose.

Why leave a margin?

Because many printers can’t print all the way to the edge of the paper, and whatever falls outside their printable area is cut off. How much margin you need depends on the printer: Scooch starts with 5 mm when you open it from this page.